Brumby 600 Quick Build Kit - $48,000 +GST

- Fuselage assembled to boat stage
- Empennage assembled excluding skins
- Wings framework completed (the builder then has to fit the skins which are pre-drilled and folded)
- For shipping the wing is left un-assembled. All components for the fuel system
- Jig kit for assembly of flaps, ailerons, elevator and rudder
- Flaps, ailerons and empennage (the builder then has to fit the skins which are pre-drilled and folded.
- Hardware kit - fasteners, rivets, cables etc
- Jig plates to assemble correct wash out in wings
- Fibreglass components are manufactured and require fitting
- Elevator trim and electric flap actuator assembly
- Engine mount and undercarriage spring legs formed and trailing nose assembly
- Canopy frame fabricated and the perspex is required to be shaped and fitted
- Adjustable seat frames
- Wheels and brakes, standard spring leg undercarriage
- Dual control sticks

Extra's not included in the quick built price

- VFR Instruments include- altimeter, oil pressure, compass, oil temperature
slip indicator, tachometer, airspeed indicator, cylinder temperature, volt meter
- Seat Belts
- Upholstery
- Wheel spats
- Engine firewall forward package - Lycoming 0-233 (116HP)
- Engine firewall forward package - Rotax 912
- Spinner
- Battery
- Oil Cooler
- VHF radio
- Propeller
- Hot box
- Painting

Brumby 600 Kit

Wing Kit - $6,500 + GST
- Main spar assembled and pre-drilled for ribs
- All ribs formed
- Skins drilled
- Leading edge formed and sealant supplied for fuel tanks
- Fibreglass wing tips
- Pitot static probe
- Flaps, ailerons, spars, ribs and skins

Empennage Kit (tailplane, fin, rudder and elevator) - $3,200 + GST
- Main spars - drilled and folded
- Splice plate
- Formed ribs
- Skins and fibreglass tips, hinges

Fuselage Wing Centre Section Kit - $10,800 + GST
- Centre section ribs formed
- Seat skins, seat tracks, seat frames and fittings
- Welded fitting
- Control column
- Bell cranks and push rods
- Elevator and trim components
- Flap torque tube
- Fuel valve
- Flap actuator
- Rudder pedals

Fuselage Kit - (included in the above kit)
- Longerons
- Engine cowls
- Firewall and stiffeners
- Bulkheads, intercostals etc
- Fuselage skins (side, bottom and turtledeck)
- Instrument panel and bulkhead

Undercarriage Kit - $3,500 + GST
- Wheels
- Brakes
- Nose undercarriage
- Main spring leg
- Master cylinders

Canopy Kit - $5,000 + GST
- Frame
- Perspex
- Tracks and latch

Finishing Kit- $1,500 + GST
- Standard upholstery and trim

Engine Mount (depending on option) - start from $1,100 +GST

Rotax engine ring mount (extra component required for Rotax only) - $1,000 + GST

Avionics available

Brumby 610 High Wing Kit $29,150 + GST

- All components are CNC cut, pre-drilled and all folding is complete
- Wings framework completed (the builder then has to fit the skins which are pre-drilled and folded)
- All components for the fuel system
- Jig kit for assembly of flaps, ailerons, elevator and rudder
- Flaps, ailerons and empennage (the builder then has to fit the skins which are pre-drilled and folded.
- Hardware kit - fasteners, rivets, cables etc
- Jig plates to assemble correct wash out in wings
- Fibreglass components are manufactured and require fitting
- Elevator trim and electric flap actuator assembly
- Engine mount and undercarriage spring legs formed and trailing nose assembly
- Canopy and side windows Perspex trimmed
- Adjustable seat frames, ready for upholstery.
- Wheels and brakes, standard spring leg undercarriage
- Dual control sticks

Prices subject to change